You are here: Home Products By Brands YOKOGAWA OSCILLOSCOPES

Products

OSCILLOSCOPES

Oscilloscopes, also called Digital Storage Oscilloscopes (DSOs) or Mixed Signal Oscilloscopes (MSOs), are a common type of test instrument used to capture, analyze, and troubleshoot electrical or real world physical signals. Oscilloscopes observe the change of electrical signals over time, continuously graphed on a display as voltage or amplitude vs. time. During observation, oscilloscopes can analyze waveforms parametrically (i.e. frequency, RMS, peak-to-peak amplitude, rise time, etc.) Non-electrical signals, especially mechatronic signals such as vibration, strain, temperature, or current can be converted to voltages and displayed.


Yokogawa oscilloscopes deliver a range of bandwidths, the world's only eight channel and sixteen channel (plus logic) oscilloscopes, unparalleled suites of triggers and signal analysis, and a unique ability to save multiple triggered-events to "History" memory.

  • Filter
  • Search
  Name SKU Description Category
2
YOKOGAWA MIXED SIGNAL OSCILLOSCOPES DLM2000 The DLM2000 is a bench-top oscilloscope for electronic design or debug.  It's ergonomic and easy to use, and packed with features.  With bandwidths from 200 to 500 MHz and memory from up to 250 Mpoints, you can be certain there is a DLM2000 to meet your application and budget.  With the DLM2000's industry first “flexible MSO input”, you can choose to activate channel four as an analog input, or use it to acquire 8 bits of logic instead.... MIXED SIGNAL OSCILLOSCOPES
1
YOKOGAWA MIXED SIGNAL OSCILLOSCOPES DLM4000 The DLM4000 is a unique to the industry eight-channel mixed-signal oscilloscope suitable to test and debugging applications in the embedded systems, power electronics, mechatronics, and automotive sectors. Available in both 350 MHz and 500 MHz models, the 2.5 GSa/sec DLM4000 features eight analog input channels. The eighth input channel features Flex MSO which converts to a 8-bit logic analyzer at the push of a button; add sixteen additional logic analyzer inputs as an option, for 24-bit logic... MIXED SIGNAL OSCILLOSCOPES
4
YOKOGAWA HIGH-SPEED DATA ACQUISITION UNIT SL1000 The new Yokogawa SL1000 is the only data acquisition system that delivers independent, isolated channel hardware at 100MS/ch rates, with no compromise in bit resolution, memory depth, or streaming performance. - Release of new firmware version 2.21 - July 25,2014 SCOPECORDERS
3
YOKOGAWA DL850E/DL850EV SCOPECORDER Measure and analyze a wealth of signals in real-time and speed up development and fault finding. The DL850E ScopeCorder is a powerful portable data acquisition recorder and oscilloscope that can capture and analyze both transient events and trends up to 200 days. Using flexible modular inputs it combines measurements of electrical signals, physical (sensors) and CAN / LIN serial buses and is able to trigger on electrical power related and other calculations in real-time. Localized language... SCOPECORDERS
29
YOKOGAWA 900 MHZ FET PROBE 700939 Active Probe, 10Vp, 900MHz, 10:1, 2.5MΩ / 1.8pF, 1.5m, FET Probe w/ LEMO power pig-tail See Also: 700938-3-D Active Probe Power Supply w/ 2 LEMO output jacks701934-D Active Probe Power Supply w/ 4 LEMO output jacksPlease use a 50Ω input oscillosope scope or use 700976 pass-thru terminator. VOLTAGE PROBES
28
YOKOGAWA PB500 500 MHZ PASSIVE PROBE (701943) Passive Probe, 'PB500', 600Vp, 500MHz, 10:1, 10MΩ, 1.5mSupplied standard with DL9000/SB5000. VOLTAGE PROBES
27
YOKOGAWA 200 MHZ PASSIVE PROBE 700960 Passive Probe, 600Vp, 200MHz, 1:1 & 10:1 switcable, 1MΩ/10MΩ, 1.5m,This is the standard passive probe included with a DL1600. VOLTAGE PROBES
26
YOKOGAWA 10 MHZ PASSIVE PROBE 701940 Passive Probe, 600Vpeak, 6MHz/10MHz, 1:1, 10:1, 1MΩ/10MΩ, 1.5m '600V Non-Isolated' Typically used for non-isolated ScopeCorder module 701255 on the Dl850/DL850V/DL750/DL750P/SL1400/SL1000. VOLTAGE PROBES
25
YOKOGAWA PBL5000 (701974) 5 GHZ LOW CAPACITANCE PROBE The PBL5000 low-capacitance "transmission line" probe (passive) features both 10:1 and 20:1 attenuation.This probe requires a 50 Ω scope/termination and can be used with any oscillscope with a BNC input. The change in attenuation is realized by changing resistance on the tip of the probe; Can also be used with DC Block 701975. For use with a scope which does not have a built-in 50 Ω termination, please purchase a 700976 50 Ω external (BNC) pass-thru terminator. VOLTAGE PROBES
24
YOKOGAWA PBA2500 (701913) 2.5 GHZ ACTIVE PROBE Use this 10:1 active probe with the DL6154, DL9240 series to realize system measurements up to 1.5 GHz BW. VOLTAGE PROBES
23
YOKOGAWA PBA1500 (701914) 1.5 GHZ ACTIVE PROBE Use this 10:1 active probe with the DL6104, DLM6104, DL9140/DL9140L , DL9510L/DL9710L, SB5000 series to realize system measurements up to 1.0 GHz BW. VOLTAGE PROBES
22
YOKOGAWA PBA1000 1.0 GHZ ACTIVE PROBE Use this 10:1 active probe with the DL6054,  DLM6054, DL9040/DL9040L , DL9505L/DL9705L,  DLM2052/DLM2054 series to realize system measurements up to 500 MHz BW. VOLTAGE PROBES
21
YOKOGAWA 100:1 ISOLATED PROBE 701947 Passive Probe, 3540Vp-CAT I, 1000Vp-CAT II, 200MHz, 100:1, 100MΩ, 1.5m, 'Isolated Probe'  'Iso-Probe'.  For use with 701250, 701251, 701260, 701280, 701281, 720210 isolated-input modules ONLY.  For use with DL850 series, DL750/DL750P, SL1400, and SL1000.  Not for use with CAT III or CAT IV measurements VOLTAGE PROBES
20
YOKOGAWA 100:1 PROBE 701945 Passive Probe, 1000Vrms, 250MHz, 100:1, 50MΩ, 3.0m, 'Mini' with extra-long 3m lead.  Compatible with DL1700, DLM2000, DLM4000, DL/DLM6000, DL9000 and SB5000.  See also 701944 for 400 MHz version of this same probe. VOLTAGE PROBES
19
YOKOGAWA 100:1 PROBE 701944 The 701944 is an oscilloscope passive probe supporting up to 1000Vrms, 400MHz bandwidth, and 100:1 attenuation ratio. The probe length is 1.2 meters, with a 50MΩ input resistance. This probe is well suited for high voltage, higher bandwidth single ended voltage measurements at an affordable cost. It is compatible with Yokogawa oscilloscope models DLM2000, DLM4000, DL/DLM6000, DL9000, SB5000 and DL1700. See also 701945 for the 250MHz bandwidth version of this same probe. VOLTAGE PROBES
18
YOKOGAWA MINIATURE PASSIVE PROBE 701942 Passive Probe, 400Vrms, 350MHz, 10:1, 10MΩ, 3.0m, 'Mini'For DL1600, DL1700E, and DL7400 series Optional probe for use with DL1600/DL1700/DL7400 series, see also 701941. VOLTAGE PROBES
17
YOKOGAWA MINIATURE PASSIVE PROBE 701941 Passive Probe, 400Vrms, 500MHz, 10:1, 10MΩ, 1.2m, 'Mini'Typically used with DL1700 and DL7400 as an optional non-standard probe. VOLTAGE PROBES
16
YOKOGAWA MINIATURE PASSIVE PROBE 701946 Passive Probe, 400Vrms, 500MHz, 10:1, 10MΩ, 1.3m, 'Mini' w/ accy kit.  Optional probe for DLM2000/DLM4000/DL6000/DLM6000/DL9000/SB6000 series. Can also be ordered as a substitute for the standard probe when ordering DLM2000/DL6000/DLM6000. VOLTAGE PROBES
15
YOKOGAWA 500 MHZ PASSIVE PROBE 701939 Passive Probe, 600Vp, 500MHz, 10:1, 10MΩ, 1.3mSupplied standard with DLM2000/DLM4000. VOLTAGE PROBES
14
YOKOGAWA 200 MHZ PASSIVE PROBE 701938 Passive Probe, 600Vp, 200MHz, 10:1, 10MΩ, 1.5mSupplied standard with DLM2000/DLM4000. VOLTAGE PROBES