|
|
YOKOGAWA TELECOM OPTICAL SPECTRUM ANALYZER AQ6370D
|
|
World-Class Optical Performance
Wavelength range: 600 to 1700nm
High wavelength accuracy: ±0.01nm
High wavelength resolution: 0.02nm
Wide dynamic range: 78dB typ.
Wide level range: +20 to -90dBm
Fast measurement: 0.2 sec. (100nm span)
Applicable to single-mode and multimode fibers
Related Products
Optical Wavelength Meter
Offers higher Wavelength Accuracy, but reduced span, and sensitivity compared to the AQ6370D OSA |
OPTICAL SPECTRUM ANALYZER
|
|
|
|
YOKOGAWA VISIBLE WAVELENGTH OPTICAL SPECTRUM ANALYZER AQ6373
|
|
The AQ6373 is one of the latest additions to the AQ6370 Series of Optical Spectrum Analyzers. With the ability to provide high speed, accurate analysis of the short wavelength range between 350nm and 1200nm, this OSA is well suited for a broad range of applications. The AQ6373 can accelerate the development and manufacturing of short wavelength lasers, passive devices and LEDs as well as equipment that uses these devices for the biomedical, material processing, consumer... |
OPTICAL SPECTRUM ANALYZER
|
|
|
|
YOKOGAWA LONG WAVELENGTH OPTICAL SPECTRUM ANALYZER AQ6375
|
|
High Performance LONG WAVELENGTHThe AQ6375 is the first bench-top optical spectrum analyzer covering the long wavelengths over 2 μm.It is designed for researchers and engineers who have been struggling with inadequate test equipment to measure in these long wavelength ranges. The AQ6375 achieves high speed measurements with high accuracy, resolution and sensitivity, even while providing full analysis features. Troublesome calibration steps and the development of external analysis software is... |
OPTICAL SPECTRUM ANALYZER
|
|
|
|
YOKOGAWA AQ6370 VIEWER
|
|
The AQ6370 Viewer is a package of PC application software for PC-based analysis and measurement with the AQ6370 series Optical Spectrum Analyzer.
Applicable for AQ6370, AQ6370B/C/D, AQ6373, and AQ6375. |
OPTICAL SPECTRUM ANALYZER
|
|
|
|
YOKOGAWA OPTICAL TIME DOMAIN REFLECTOMETER AQ7280
|
|
Responding to the growing needs for reliable and ease-of-use field test instruments for installation and maintenance of fiber optic networks, Yokogawa AQ7280 Optical Time Domain Reflectometer (OTDR) is designed to empower field technicians to make fast and precise measurements with confidence.
The AQ7280 satisfies a broad range of test and measurement needs in analyzing optical networks from access to core. |
OPTICAL TIME DOMAIN REFLECTOMETER
|
|
|
|
YOKOGAWA OPTICAL TIME DOMAIN REFLECTOMETER AQ7275
|
|
The AQ7275 is one of the best selling OTDRs in the world. Model lineup has been expanded to a total of 9 models to choose from with a dynamic range of up to 45dB . Wavelength capability spans from 850nm (MMF) to 1650nm (SMF). An impressive 0.8m event dead zone makes this model an excellent choice for FTTH and metro, core networks.
Enhancements include a PON option allowing accurate event analysis after a 1x32 splitter with significantly reduced undershoot effects. Also unique to the industry... |
OPTICAL TIME DOMAIN REFLECTOMETER
|
|
|
|
YOKOGAWA MFT-OTDR OPTICAL TIME DOMAIN REFLECTOMETER AQ1200
|
|
The AQ1200 Multi Field Tester OTDR is a compact and lightweight handheld OTDR optimized for the installation and maintenance of optical fiber cables. Designed with ease of use in mind to simplify field testing, improve work efficiency and ensure qualify results. Seven models are offered, each with unique wavelength(s) based on their specific application.
Reduced energy, emission of CO2, NOX and SOX about 40% compared to the previous model.
|
OPTICAL TIME DOMAIN REFLECTOMETER
|
|
|
|
YOKOGAWA REMOTE OPTICAL TIME DOMAIN REFLECTOMETER AQ7277
|
|
The AQ7277 is an OTDR module for RFTS (Remote Fiber Test Sytem), which uses the advanced technology transferred from the AQ7275 high performance OTDR. |
OPTICAL TIME DOMAIN REFLECTOMETER
|
|
|
|
YOKOGAWA OTDR EMULATION SOFTWARE AQ7932
|
|
AQ7932 is application software that performs analysis of trace data from the OTDR on a PC, and conveniently creates professional reports. The built-in report creation wizard function makes this task simple, quick and easy.
Display up to eight traces on screen, and perform a variety of analyses including multi-trace analysis and differential trace analysis for comparing recent waveforms with old ones, and use the 2 way trace analysis function for analyzing average values of data measured from... |
OPTICAL TIME DOMAIN REFLECTOMETER
|
|
|
|
YOKOGAWA AQ6150 SERIES OPTICAL WAVELENGTH METER
|
|
The AQ6150 Series Optical Wavelength Meter is an ideal instrument for accurately measuring the optical wavelength of optical devices and systems used in telecommunication applications from 1270 to 1650 nm (including C&L Band). By employing a Michelson interferometer and a high speed Fast Fourier Transform (FFT) algorithm, the AQ6150 series can measure not only a single wavelength laser signal, but also a multiple wavelength laser signal from a DWDM system and Fabry-Perot laser. Furthermore,... |
OPTICAL WAVELENGTH METER
|
|
|
|
YOKOGAWA TEST_20140826
|
|
test_20140826 |
MODULAR MANUFACTURING TEST SYSTEM
|
|
|
|
YOKOGAWA AQ2211 FRAME CONTROLLER (3 SLOTS)
|
|
The AQ2211 and AQ2212 frame controllers are platforms for the AQ2200 Multi Application Test System. These frame controllers contain a variety of measurement applications that enable you to get the information you need without connecting an external controller PC. In addition, they have three different external interfaces, so you can always use the best interface for a particular measurement application. |
MODULAR MANUFACTURING TEST SYSTEM
|
|
|
|
YOKOGAWA AQ2200-221 SENSOR MODULE (DUAL CHANNEL, LONG WAVELENGTH)
|
|
The AQ2200-221 is a high-performance yet compact module equipped with two sensors. The module offers high-speed sampling, low polarization dependency, and rich data processing capabilities for improved measurement throughput and low-cost multi-port measurement. With two high-performance sensors in one slot, this Optical Power Meter Sensor Module is ideal for space-saving, multi-port measurements. |
MODULAR MANUFACTURING TEST SYSTEM
|
|
|
|
YOKOGAWA AQ2200-311A OPTICAL ATTENUATOR MODULE
|
|
The AQ2200-311A is a variable optical attenuation for the AQ2200 series. When it is installed in an AQ2200 series frame controller, it allows optical output to be attenuated to any value.
Wide attenuation range:
0 to 60 dB (SM version)
0 to 45 dB (MM version)
Wide wavelength range:
1200 to 1700 nm(SM version)
800 to 1370 nm (MM version)
Low insertion loss: 1.0 dB (typical)
Low polarization dependence loss: 0.1 dBp-p or less
Monitor output (optional)
Configure the desired... |
MODULAR MANUFACTURING TEST SYSTEM
|
|
|
|
YOKOGAWA AQ2200-331 OPTICAL ATTENUATOR MODULE (WITH A BUILT-IN OPM)
|
|
Compact: The AQ2200-331 features an optical variable attenuator and an optical power meter for monitoring the optical output power in a one-slot module. Ideal for bit error testing
Compatible with SMF (core diameter of 10 µm) or MMF (core diameter of 62.5 µm)
Attenuation accuracy: within ±0.1 dB
With the output monitoring function, the AQ2200-331 allows direct setup of optical power at the output terminals
Can be combined with various AQ2200 series modules or other Yokogawa's optical... |
MODULAR MANUFACTURING TEST SYSTEM
|
|
|
|
YOKOGAWA AQ2200-342 DUAL ATTENUATOR MODULE
|
|
Compact and space saving: The AQ2200-342 features two optical variable attenuator in a one-slot module
Wavelength range: 1260 to 1640 nm
Maximum attenuation range: 40 dB
Fast attenuation control: 100 ms
Shutter isolation: 70 dB or more
Reduced energy, emission of CO2, NOX and SOX about 45% compared to the previous model.
|
MODULAR MANUFACTURING TEST SYSTEM
|
|
|
|
YOKOGAWA AQ2200-131/132 GRID TLS MODULE (C/L BAND, 1-CHANNEL / 2-CHANNEL
|
|
The AQ2200-131 and AQ2200-132 are single and dual channel tunable light source modules for mounting into the AQ2200 series multi application test system. The output wavelength can be conveniently set to the predefined DWDM grid channels.
Reduced energy, emission of CO2, NOX and SOX about 10% compared to the previous model.
|
MODULAR MANUFACTURING TEST SYSTEM
|
|
|
|
YOKOGAWA AQ2200-215 SENSOR MODULE (HIGH POWER UP TO +30DBM, LONG WAVELENGTH)
|
|
The AQ2200-215 is an optical power meter designed specifically to measure high optical power up to +30dBm. It features high speed sampling and advanced data processing functions. The AQ2200-215 is an ideal measurement tool for optical output power measurement and margin test of WDM transmission equipment, as well as gain measurements of optical fiber amplifiers. It is commonly used in conjunction with other AQ2200 Series modules and the AQ6370C Optical Spectrum Analyzer to offer a... |
MODULAR MANUFACTURING TEST SYSTEM
|
|
|
|
YOKOGAWA AQ2200-411 OPTICAL SWITCH MODULE (1 X 4/1 X 8)
|
|
Compact: Optical switches of 1 x 4 or 1 x 8 port configuration in a one-slot size module
Compatible with SMF (core diameter of 10 µm) or MMF (core diameter of 62.5 µm)
Low insertion loss: 1.0 dB (typ.)
High switching reproducibility: within ±0.01 dB
Can be combined with various AQ2200 series modules or other Yokogawa's optical communication measuring instruments to build versatile measuring systems
DETAILS
HIGH-PERFORMANCE OPTICAL... |
MODULAR MANUFACTURING TEST SYSTEM
|
|
|
|
YOKOGAWA AQ2200-412 OPTICAL SWITCH MODULE (1 X 16)
|
|
Compact: Optical switches of 1 x 16 port configuration in a two-slot size module
Compatible with SMF (core diameter of 10 µm).
MMF (core diameter of 50 or 62.5 µm) is also available on request.
Low insertion loss: 1.0 dB (typ.)
High switching reproducibility: within ±0.01 dB
Can be combined with various AQ2200 series modules or other Yokogawa's optical communication measuring instruments to build versatile measuring systems
|
MODULAR MANUFACTURING TEST SYSTEM
|
|
