You have 0 items in your cart.
Fluke
Sub Categories
| Name | SKU | Description | Category | ||
|---|---|---|---|---|---|
|
Fluke RS400 Probe Accessory Replacement Kit For VPS400 Series Probes | Compatible with: VPS410B, VPS410G, VPS410R, and VPS410V | Test Leads, Probes, Clips |
|
|
|
Fluke MA190 Accessory Kit for Medical and Video Applications | Kit Includes: 50 Ohm BNC insulated feedthrough terminator 50 Ohm BNC terminator with 10:1 signal attenuation 1 Ohm current shunt for current measurements Safety-designed BNC cable, 1.5 m (5 ft) Insulated BNC (f) to 4mm-banana plug adapter Dual 4 mm banana receptacles (1 red, 1 black) | Test Leads, Probes, Clips |
|
|
|
Fluke HC200 Hook Clip set 2 red, 2 gray | Set of four Hook Clips (two red and two gray). Compatible with VPS100, VPS101, VPS121 and all VPS200 series probes Maximum Voltage: 600V rms. CAT III per IEC 1010-2-031 Maximum Wire Size: 2.5mm Contact Material: Nickel plated steel | Test Leads, Probes, Clips |
|
|
|
Fluke HC120 Hook Clips (Set of 2: Red, Gray) | Maximum Voltage: 600V rms. CAT III per IEC 1010-2-031 Maximum Wire Size: 2.5mm Contact Material: Nickel plated steel | Test Leads, Probes, Clips |
|
|
|
Fluke FTP-1 Fused Test Probe Set | Fused test probe set Additional protection when measuring voltage or current Fits any Fluke modular test leads | Test Leads, Probes, Clips |
|
|
|
Fluke BP980 Double Banana Plug Kit | 5 pair (red, black) of double 4 mm banana plugs Each plug has 3.1 mm holes for mounting wires and components Brass plugs/jack, beryllium copper springs 30 V rms or 60 V DC, 15 A One year warranty | Test Leads, Probes, Clips |
|
|
|
Fluke AS400 Probe Accessory Kit for VPS400 Probes | Probe Accessory Kit for VPS400 Probes | Test Leads, Probes, Clips |
|
|
|
Fluke AC87 Heavy Duty Bus Bar Clip Set | One pair (red, black) of flat, right angle design for connecting to bus bars Adjustable collar provides 2 ranges of jaw openings up to 30 mm CAT III 600 V, 5 A rating. UL listed One year warranty | Test Leads, Probes, Clips |
|
|
|
Fluke 8845A-TPIT Test Probe IC Tip Set | One pair (red and black) Snaps onto DMM probes with .080 in (2 mm) O.D. Tips Designed to IEC 1010 standard Pin tip jack at the adapter end is recessed for added insulation protection Adapter allows easy access to leads of through-hole IC’s Insulation at the tip fits between leads to prevent accidental shorting | Test Leads, Probes, Clips |
|
|
|
Fluke 8845A-EFPT Extended Fine Point Tip Adapter Set | One pair (red and black) Snaps onto DMM probes with .080 in (2 mm) O.D. Tips Designed to IEC 1010 standard Adapter allows access to hard-to-reach test points Tips are insulated to the point to prevent shorting of adjacent components | Test Leads, Probes, Clips |
|
|
|
Fluke AC89 Heavy Duty Insulation Piercing Test Clip | Single probe pierces 0.25 to 1.5 mm insulated wire Small pin allows self-healing of the insulation CAT IV 600V, CAT III 1000 V, 5 A rating. UL listed One year warranty | Test Leads, Probes, Clips |
|
|
|
Fluke AC285-FTP Alligator Clips and Adaptors for FTP-1 and FTPL-1 | Alligator Clips and Adaptors For FTP-1 and FTPL-1 Fused Test Probes | Test Leads, Probes, Clips |
|
|
|
Fluke AC285 Aligator Clips | One pair (red, black) of large alligator clips with nickel-plated steel jaws Multi-purpose tooth pattern grips anything from fine gauge wire to a 20 mm bolt Recommended for use with TL222 and TL224 test leads CAT IV 600 V; CAT III 1000 V, 10 A rating One year warranty | Test Leads, Probes, Clips |
|
|
|
Fluke AC283 Pincer Clips | One pair (red, black) of nickel plated pincers open to 5 mm 11.4 cm flexible insulated shaft Recommended for use with TL222 and TL224 test leads CAT IV 600 V, CAT III 1000 V, 1 A rating. UL listed One year warranty | Test Leads, Probes, Clips |
|
|
|
Fluke AC280 Pincer Clips | One pair (red, black) of nickel plated clips Profile narrows to 5.6 mm at tip, hook opening 6.4mm at front, 2 mm at base Recommended for use with TL222 and TL224 test leads CAT IV 600 V, CAT III 1000 V, 3 A rating. UL listed | Test Leads, Probes, Clips |
|
|
|
Fluke AC220 SureGrip™ Alligator Clips | One pair (red, black) of small, insulated, nickel plated jaws Blunt tip grabs round screw heads up to 9.5 mm Recommended for use with TL222 and TL224 test leads CAT IV 600 V, CAT III 1000 V, 10 A rating. UL listed One year warranty | Test Leads, Probes, Clips |
|
|
|
Fluke AC120 Alligator Clips | Maximum Voltage: 600Vrms CAT III per IEC 1010-2-031 Maximum Current: 10A Material: Nickel-plated steel jaw Jaw Opening: 5/16’’ (8mm) | Test Leads, Probes, Clips |
|
|
|
Fluke TP80 Electronic Test Probes | One pair (red, black) IC insulated cap prevents shortening of IC legs for probing high density components or boards CAT III 1000 V, 10 A rating. UL listed One year warranty | Test Leads, Probes, Clips |
|
|
|
Fluke TP74 Lantern Tip Test Probes | One pair (red, black) Tips include banana-style spring contacts with nickel-plated brass ends CAT III 1000 V, 10 A rating One year warranty | Test Leads, Probes, Clips |
|
|
|
Fluke TP40 Automotive Back Probe Pins (five) | Banana jack accepts all DMM and banana jack leads Tested to 60 V DC | Test Leads, Probes, Clips |
|